G Configuring A Screen (Default/Basic/Customised) - Xerox Document Centre 706 Series User Manual

G G
Custom Presets
Configuring a screen (default/basic/customised)
6
G The screen on the right is when the
Auditron feature is enabled. See
Chapter 9 Using the Auditron
Feature for details.
G The factory default of the access
number is "11111".
160 6-3 Configuring the Machine with Tools Mode
This section explains the procedures for changing the default screen, and
customising the Basic Features screen and the Customised Features
screen.
G Changing the default screen
This feature allows you to display the desired screen when the power is
switched on, when it returns to the ready mode from the power saver
mode, or when Clear All is pressed.
The factory default screen is the Basic Features screen.
Procedure
Press Settings/Meter Check.
Select Tools Mode.
Enter the access number of the System Administrator and
select Confirm.
Each input digit is represented by an asterisk.