Table of Contents
Advertisement
How to change the system features (continued)
Introduction
Procedure
How to customize the MAX 200
Plotter setup
The plotter setup allows access to the plotter setup features. There
are three setup features available:
Feature
Set default time to plot
Set delay time to copy
mode
Folder
Set default time to plot
1. Enter custom presets. If needed, refer to page 174.
Press Custom Presets to return to
Previous screen.
System features
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
2. Select the system features tab.
3. Use the arrows to select the plotter setup feature.
4. Select open.
The plotter setup screen is displayed.
Function
Sets up the time delay from copy mode
to plot mode. Refer to page 183.
Sets up the time delay it takes from plot
mode to copy mode. Refer to page 185.
Sets up the fold default for plot mode.
Refer to page 187.
Storage/Disk
Copy features
Manager
Open
183
Advertisement
Table of Contents
