Two Color (Black And Red) - Xerox MAX 200 User Manual

Print color (continued)
Procedure
Basic touch screen features

Two color (black and red)

Note: This option is automatically enabled, if you set any of the copy
features to recognize a specific color on your document to be printed
red.
1. Select the basic feature group tab. If needed, refer to page 68.
2. Select the print color button, on the basic screen.
The print color screen is displayed.
Ready to copy
Load documents face down
Print Color
Black/Red
Red Only
Black Only
3. Select black/red.
4. Select scanner color (specifies the color on the document to be
printed in red).
The scanned color screen is displayed.
Ready to copy
Load documents face down
Scanned Color
One or more colors in the original document
may be copied in red
All others will be copied in black
Red
Blue
5. Select the desired colors, to be copied in red. To cancel a color
selection, press the same color button again.
Multiply colors can be selected.
Others specify colors other than red, blue, green, yellow,
and black.
To cancel the changes and exit from this screen, select cancel.
6. Insert the document to make copies, or select done as required
to select additional features.
Selected
Cancel Done
Printed as Red
Red
Printed All in
Black and Red
Press [Scanned
Color] to select
document color(s)
to be printed in red. Scanned
Color
Selected
Cancel
Green Others
Yellow Black
01
01
Done
91