Table of Contents
Advertisement
How to change the system features (continued)
Introduction
Procedure
How to customize the MAX 200
Auto power off
The auto power off feature switches the machine power off, if the
machine is not used for a selected period of time. You set the time
period.
Press [Custom Presets] to return to
Previous screen.
System features
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
1. Enter custom presets. If needed, refer to page 174.
2. Select the system features tab.
3. Use the arrow buttons to select the auto power off feature.
4. Select open.
The auto power off screen is displayed.
Custom Presets
Auto Power Off
Select time (from end of last job) until power off.
1 Hour
4 Hours
No
5. Select the desired default time; No, 1 – 5 hours.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Storage/Disk
Copy features
Manager
Cancel
2 Hours
5 Hours
Open
Done
3 Hours
177
Advertisement
Table of Contents
