How to change the copy features (continued)
Introduction
Procedure
How to customize the MAX 200
Image density
The image density feature sets up the image density default on the
image density screen, located on page 87.
Press [Custom Presets] to return to
Previous screen.
System features
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
Variable length default
Background Suppression Level Default
Image Density
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the image density feature.
4. Select open.
The image density screen is displayed.
Custom Presets
Image Density
Black
Normal
5. Use the arrow buttons to set the default image density for black
and red.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Storage/Disk
Copy features
Manager
Cancel
Lighter
Red
Normal
Darker
Open
Done
223