Table of Contents
Advertisement
How to change the copy features (continued)
Introduction
Procedure
224
Document image type
The document image type feature sets up the document image
type default, located on page 88.
When a document is scanned, the machine makes adjustments to
meet specific image quality conditions, for the selected default.
When setting up this feature, select the document image type you
scan the most.
Press [Custom Presets] to return to
Previous screen.
System features
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
Variable length default
Background Suppression Level Default
Image Density
Document Image Type
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the document image type
feature.
4. Select open.
The document image type screen is displayed.
Custom Presets
Document Image Type
Line
Line/Picture
Dark Contrast
Low Contrast
5. Select the desired document image type default; line,
line/picture, picture, photo, low contrast, or dark contrast.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Storage/Disk
Copy features
Manager
Cancel
Picture
How to customize the MAX 200
Open
Done
Photo
Advertisement
Table of Contents
