Table of Contents
Advertisement
R/E; media; cut (continued)
Procedure
Basic touch screen features
Paper length adjustment (continued)
Synchronized (continued)
Ready to copy
Load documents face down
Paper Length Adjustment
Standard
Synchronized
Long Copy
Variable
Length
5. Adjust the margins as desired, using the arrow or the
buttons. To clear wrong data, select clear.
You can add up to 999 mm to the lead or trail edge margin
or remove up to 90 mm from the lead or trail edge margin.
To cancel the changes and exit from this screen, select cancel.
6. Insert the document to make copies, or select done as required
to select additional features.
Long copy
1. Select the basic feature group tab. If needed, refer to page 68.
2. Select the R/E; media; cut button, on the basic screen.
The R/E; media; cut screen is displayed.
Ready to copy
Load documents face down
R/E; Media; Cut
100.0%
Normal R/E
R/E by L&W
100.0%
3. Select paper length adjustment.
The paper length adjustment screen is displayed.
Selected
Cancel
Done
mm (-90~+999)
0
+100
100
mm (-90~+999)
0
+100
100
Selected
Cancel
Done
36"
Bond
Synchronized
24"
Bond
Paper Length
Adjustment
24"
Bond
18"
Vellum
Manual Feed
12"x18" Bond
01
Clear
Clear
100
01
83
Advertisement
Table of Contents
