Table of Contents
Advertisement
Printer
No.
Name
1
Copy output tray exit
area
2
Copy output tray
3
Manual feed tray
4
RFC drawer 1
5
RFC drawer 2
6
Cut sheet tray
7
Printer control panel
8
Front door
9
Copy output
folder/stacker exit area
Getting to know the MAX 200
Front
Function
Copies that exit this area are feed to the copy output tray.
Copies are placed onto the copy output tray when there is no
folder or stacker. Maximum media tray capacity is 100 sheets
(20 –24 lb.).
Supplies standard or nonstandard media sizes. All media is feed
manually.
The roll feed cutter (RFC drawer 1) supplies up to 2 rolls of media.
The media type and series panel is included in the drawer, for
detailed information about the panel, refer to page 38.
The roll feed cutter (RFC drawer 2) supplies up to 2 rolls of media.
The media type and series panel is included in the drawer, for
detailed information about the panel, refer to page 38.
Supplies 1000 sheets of cut sheet media, 8.5 x 11 inch to 12 x 18
inch. The cut sheet tray is also referred to as tray 5. The media
series panel is included in the tray, for detail information about the
panel, refer to page 38.
Displays the printer status and includes the offline button, and the
red and black increase toner buttons. For detailed information
about the panel, refer to page 30.
Open to access media jams or to replace the toner cartridge.
Copies that exit this area and are fed into the folder or stacker.
Right side
17
Advertisement
Table of Contents
