Table of Contents
Advertisement
How to change the system features (continued)
Introduction
Procedure
178
Auto power save
The auto power save feature reduces the machine power if the
machine is not used for a selected period of time. You set the time
period.
Press [Custom Presets] to return to
Previous screen.
System features
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
1. Enter custom presets. If needed, refer to page 174.
2. Select the system features tab.
3. Use the arrow buttons to select the power save feature.
4. Select open.
The auto power save screen is displayed.
Custom Presets
Auto Power save
Select time (from end of last Copy Job)
until power save
1 minute
No
10 minutes
5. Select the desired time; No, 1 – 30 minutes.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Storage/Disk
Copy features
Manager
Cancel
3 minutes
20 minutes
How to customize the MAX 200
Open
Done
5 minutes
30 minutes
Advertisement
Table of Contents
