Table of Contents
Advertisement
How to change the system features (continued)
Introduction
Procedure
How to customize the MAX 200
Plotter setup (continued)
Folder
Note: If your system has a folder, do not put A or A4 size cut sheet
into the tray 5, short edge feed. Refer to your user guide for detailed
information.
Note: Film/Mylar and vellum can not be folded.
This folder feature sets up the fold default for plot mode.
There are three fold options available, P1, P2, and P3. You can also
select no fold (this option is usually for systems with a stacker).
1. Enter custom presets. If needed, refer to page 174.
Press Custom Presets to return to
Previous screen.
System features
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
2. Select the system features tab.
3. Use the arrows to select the plotter setup feature.
4. Select open.
The plotter setup screen is displayed.
Storage/Disk
Copy features
Manager
Open
187
Advertisement
Table of Contents
