Table of Contents
Advertisement
Media type and series panel
Media series panel (tray 5)
38
There are four media type and series panels, one for each roll. They
are located next to each roll in the RFC drawer. This section
provides an overview of the media type and series panel
components.
For detailed information about the RFC media specifications, refer to
the appropriate chart in Media, starting on page 43.
Name
Function
Media series
Set the dial to the correct media series.
When the drawer is closed, the RFC panel window
displays the media series.
Media type
Set the dial to the correct media type.
When the drawer is closed, the RFC panel displays
the media type.
Window
Function
When the drawer detects media the indicator lights.
example is for roll 1.
The media series panel is located in the cut sheet tray, tray 5.
For detailed information about the cut sheet tray media
specifications, refer to the appropriate chart in Media, starting on
page 43.
Note: Only bond media can be loaded into tray 5.
Name
Function
Media series
Set the dial to the correct media series.
When the tray is closed, the cut sheet panel
window displays the media width for the selected
series.
Note: The media type and series panel in this
Getting to know the MAX 200
Advertisement
Table of Contents
