NEC SL2100 Features And Specifications Manual page 889

ISSUE 1.0 SL2100
Release of Conference ID:
The Conference ID is released under following conditions:
• The number of participants becomes zero.
• The Web Conference Duration Timer expires.
If a conference URL is accessed after the conference ID is released, an error is displayed. As soon as
the conference ID is released, it becomes available for re-use.
Reloading the Webpage:
When a conference web-page is reloaded, it is considered as exiting and re-entering the conference. If
a user reloads the webpage when no other user exists, the conference ID is released and the user
cannot re-enter.
V
Forced Disconnect:
If the connection with the server is lost, all the conferences will be closed with an error. If any user is
disconnected, the user is disconnected from the conference.
Creating a Conference Without a Login:
With the following URL format user can directly create a conference by passing the login screen
<https://[System URL]/uc/conf?id=[Conference ID]&u=[User ID]&p=[Password]>
Duration Timer and End Alert Timer:
The SL2100 starts the web conference duration timer from the time when an organizer creates a
conference. When the End Alert timer is not zero and is shorter than the Web Conference Duration
timer then an End Alert is displayed as per Program 20-64-02 value before the Web Conference
Duration timer expires. The warning alert asks if the conference needs to be continued or not. If yes is
pressed then timers are reset and count starts again. When the End Alert timer is zero or is greater
than Web conference duration timer then warning dialogue is not displayed. If the conference timer
expires, then a time out error is displayed to all the participants and the conference is released.
Screen Sharing:
For screen sharing press the Switch Button for Camera/Screen Share (refer to Figure 1-57 Switch
Button for Video/Screen Sharing on page 1-876).
Features and Specifications Manual 1-875