NEC SL2100 Features And Specifications Manual page 858

SL2100
Related Features
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Direct Inward Dialing (DID)
Dial Tone Detection
Multiple Trunk Types
Programmable Function Keys
Prime Line Selection
T
Trunk Groups
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Primary Trunk Group Routing
Program
No.
11-09-01 Trunk Access Code - Trunk Access Code
14-05-01 * Trunk Group - Trunk Group Number
21-02-01 * Trunk Group Routing for Extensions - Route Ta-
ble Number
14-06-01 Trunk Group Routing - Trunk Group
Alternate Trunk Group Routing
Program
No.
11-09-02 * Trunk Access Code - 2nd Trunk Route Access
Code
14-05-01 * Trunk Group - Trunk Group Setup
21-15-01 * Individual Trunk Group Routing for Extensions -
Route Table Number
1-844
Program Name
Program Name
Input Data
Dial (Up to four digits)
Trunk Port 1 ~ 128
Group Number 0 ~ 50
Priority 1 ~ 128
0 ~ 50
0 = No Setting (Calls will not
route.)
0 = Not Set
001 ~ 050 = Trunk group No.
1001 ~ 1050 = 1000 + Route Ta-
ble No.
Input Data
Dial (Up to four digits)
Trunk Port 1 ~ 128
Group Number 0 ~ 50
Priority 1 ~ 128
0 ~ 50
0 = No Setting (Calls will not
route.)
Trunk Group Routing
ISSUE 1.0
Default
0
1
1
Refer to Programming
Manual.
Default
No Setting
1
0