NEC SL2100 Features And Specifications Manual page 737

ISSUE 1.0
Guide to Feature Programming
Program Program Name
No.
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-07 Class of Service Options (Outgoing Call Service)
- Repeat Redial
21-08-01 Repeat Dial Setup - Repeat Redial Count
21-08-02 Repeat Dial Setup - Repeat Redial Interval Time
21-08-03 Repeat Dial Setup - Repeat Dial Calling Timer
21-08-04 Repeat Dial Setup - Time for Send Busy Tone for
ISDN Trunk
Operation
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call.
Listen for busy tone or ring no answer.
2. Press the Repeat Redial key (PRG 15-07 or SC 751: 29).
The Repeat Redial key flashes while you wait for the system to redial.
3. Press Speaker key to hang up.
The system periodically redials the call.
4. Lift the handset when called party answers.
When using trunks with answer supervision the Repeat Redial feature automatically cancels.
To cancel Repeat Redial:
1. Press the Repeat Redial key (PRG 15-07 or SC 751: 29). (Also refer to
page 1-551.)
Features and Specifications Manual
Input Data
-
1 ~ 15
0 = Off
1 = On
0 ~ 255
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
Last Number Redial on
SL2100
Default
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
3
60
30
0
1-723
R