NEC SL2100 Features And Specifications Manual page 561

ISSUE 1.0
In PRG 15-01-04,
enter 0 In PRG
10-03-05 enter 0
In PRG 20-09-03, enter
0 to disable sub-address
display by Telco.
In PRG 14-01-07,
enter 0 to prevent
outgoing calls.
program extensions
In PRG 14-01-10,
enter 0.
Features and Specifications Manual
A
Should Caller ID be included
No
in the call's setup message?
Should Telco display the
No
calling number's sub-address?
In PRG 21-12-01, program the calling
party number data (16 digits max.)
for each trunk.
In PRG 21-13-01, program the calling
party number data (16 digits max.)
for each extension.
Are outgoing
No calls allowed on
specific trunks?
In PRG 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
Do you need to restrict
In the default
certain extensions from
placing calls on certain
trunks?
No
Should caller hear DTMF
No
confirmation tones as they
are dialing a trunk call?
If a user preselects a line, how
long should the system
remember the preselection?
No
If the system detects the called party is
busy, how long should the busy
tone be heard? (0-64800)
Go To
B
In PRG 15-01-04,
Yes
enter 1 In PRG
10-03-05 enter 1.
In PRG 20-09-03, enter
Yes 1 to enable sub-address
display by Telco.
In PRG 20-06-01,
assign Class of Service
to extensions.
In PRG 14-01-07,
Yes enter 1 to allow
outgoing calls.
Build an out going
restriction matrix
In PRG 14-07-01
for each Access
Map, select the
Yes
access options
for each trunk.
In PRG 15-06-01,
assign extensions
to Access Maps.
In PRG 14-01-10,
Yes
enter 1.
In PRG 20-02-06,
Yes
enter the preselection
interval.
SL2100
I
1-547