NEC SL2100 Features And Specifications Manual page 711

ISSUE 1.0
• Modem (remote) connections are established via the internal EXIFB modem. To access the modem,
dial a trunk that is directed to the modem access service code (DIL or DID) or dial an extension that
is redirected to the modem access service code. When connecting with a Modem, a Dial Up
Connection (PPP) must be set up in Windows Network Connections.
When uploading via a Dial Up connection, uploading board configuration (Hardware Upload) is not
supported.
• IP (LAN) connections are established by connecting the LAN cable to CPU Board.
3
1
2
4
1. Select Connection Type.
You can connect by entering IP Address in IP or you can enter the NetBIOS Name which you set
at PRG 10-62-02 (Default is: SL2100)
2. To login, specify User Name and Password.
3. (Optional) Load a defined Connection Account (can skip steps 1~3 by using this option.)
4. To make the connection to the system, click Connect.
If using WebPro, a user can connect only via IP. To connect, launch a web browser (i.e., IE or
Mozilla®) and enter the IP address of the system (default 192.168.0.10).
Features and Specifications Manual
Figure 1-35 PCPro Connection Dialog
SL2100
P
1-697