NEC SL2100 Features And Specifications Manual page 703

ISSUE 1.0
3. Press Speaker key to hang up.
If not picked up, the call recalls to you.
- OR -
1. At the Multiline Terminal, press Hold key.
- OR -
At a Single Line Terminal, hookflash.
2. Dial #6 and the Park orbit (01~50).
If you hear busy tone, the orbit is busy. Try another orbit.
If you hear a busy tone, the orbit is busy. Dial #6
AutoSearching) to search for an idle park location in ascending order.
3. Use Paging to announce the call.
4. Press Speaker key to hang up.
If not picked up, the call recalls to you.
The parked call recalls after the Park Hold Time (PRG 24-01-06). The call rings the extension to
which it recalled for the Hold Recall Callback Time (PRG 24-01-02). The call then goes on Hold
for the Park Hold Time, then recalls again for the Hold Recall Callback Time. The call continues
to cycle between Hold and recall until the extension user answers the call or the outside party
hangs up.
To pick up a parked call:
1. Lift the handset.
2. Press the Park key (PRG 15-07 or SC 752:
- OR -
1. At the Multiline Terminal, press Speaker key.
- OR -
At Single Line Terminal, lift the handset.
2. Dial 6 and the Park orbit (01 ~ 50).
*
To Park a call at your extension:
1. Do not hang up.
2. Press the Personal Park key (PRG 15-07 or SC 752:
- OR -
Press Hold key and dial 757.
- OR -
Press Hold key and the Personal Park key (PRG 15-07 or SC 752:
At a Single Line Terminal, hookflash instead of pressing Hold key.
A confirmation tone is heard and the call is parked at your extension. If the extension has a Personal
Park key, the key flashes.
The Personal Park single-digit service code (PRG 11-16-11) cannot be used in this operation.
3. Page your co-worker to pick up the call.
4. Press Speaker key to hang up (or hang up at the Single Line Terminal).
If not picked up, the call recalls to you.
Features and Specifications Manual
if enabled in PRG 20-11-27 (Call Park
*
04 + orbit).
*
07).
*
07).
*
SL2100
P
1-689