NEC SL2100 Features And Specifications Manual page 769

ISSUE 1.0
Program Program Name
No.
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
15-07 Programmable Function Keys
20-21-05 System Options for Long Conversation - Conver-
sation cutoff for remote monitor
11-10-49 Service Code Setup (for System Administrator) -
Auto Dial Setting for Remote Inspection
20-45-01 Remote Watch Setup - Ring Terminal for Remote
Inspection
20-45-02 Remote Watch Setup - Ring Time Setting
20-45-03 Remote Watch Setup - Ring Timer
20-45-04 Remote Watch Setup - Auto Dial Number Area
Setting
20-45-05 Remote Watch Setup - VRS Message for Answer
20-45-06 Remote Watch Setup - VRS Message for Auto Di-
al
20-45-07 Remote Watch Setup - Time of Repeat Auto Dial
20-45-08 Remote Watch Setup - Auto Dial Calling Time
20-45-09 Remote Watch Setup - Interval of Auto Dial
35-02-23 SMDR Output Options - Watch Auto Dialing
90-10-01 System Alarm Setup - Alarm type
90-10-02 System Alarm Setup - Report
90-20-11 Traffic Report Data Setup - Security Sensor Dial
Record
Watch mode:
Program Program Name
No.
10-03-05 ETU Setup - Select Port type
11-10-46 Service Code Setup (for System Administrator) -
Watch Message Setting
Features and Specifications Manual
Input Data
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0, , #, P, R, @
*
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 8 digits)
-
0 ~ 64800 seconds
0~9, * , # Maximum of 8 digit
Extension Number (Up to 8 dig-
its)
0000 ~ 2359
0 ~ 60
0 ~ 999
0 ~ 100
0 ~ 100
0 ~ 255
0 ~ 3600
0 ~ 3600
0 = No Output
1 = Output
0 = Not Report (No autodial)
1 = Report (autodial)
0 = Not Recorded
1 = Recorded
Input Data
0 = SLT (082U-SLT Port 1/2)
1 = Door Phone (082U-SLT Port
1/2)
0~9, * , # Maximum of 8 digit
SL2100
Default
No Setting
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
180
619
No Setting
0000
0
0
0
0
0
0
0
1
Refer to Programming
Manual
Refer to the Program-
ming Manual for the
default values.
1
Default
0
614
1-755
S