NEC SL2100 Features And Specifications Manual page 208

SL2100
Related Features
Central Office Calls, Placing
Code Restriction Override/Toll Restriction Override
Code Restriction, Dial Block/Toll Restriction, Dial Block
Direct Inward System Access (DISA)
PBX Compatibility/Behind PBX
Multiple Trunk Types
C
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
14-01-08 Basic Trunk Data Setup - Toll Restriction
21-04-01 * Toll Restriction Class for Extensions - Restric-
tion Class
21-21-01 Toll Restriction for Trunks (Seized Trunk Basis
Setting) - Restriction Class
15-02-30 Multiline Telephone Basic Data Setup - Toll Re-
striction Class
21-05-01 Toll Restriction Class - International Call Restric-
tion Table
21-06-01 Toll Restriction Table Data Setup - International
Call Restriction Table
21-05-02 Toll Restriction Class - International Call Permit
Code Table
21-06-02 Toll Restriction Table Data Setup - International
Call Permit Code Table
21-05-04 Toll Restriction Class - Maximum Number of Dig-
its Table Assignment
1-194
Program Name Input Data
0 = Restriction Disabled (Toll re-
striction will not be applied to
calls on this trunk.)
1 = Restriction Enabled (Toll re-
striction will be applied to calls on
this trunk.)
1 ~ 15 = Toll Class 1 ~ 15
1 ~ 15 = Toll Class 1 ~ 15
0 = Virtual Extension (Follows
virtual extension Toll Class in
PRG 21-04.)
1 = Real Extension (Follows
physical stations Toll Class in
PRG 21-04.)
0 = Unassign (No international
restrict table applied.)
1 = Assign (Table in PRG
21-06-01 is applied.)
Maximum of 4 digits to be as-
signed
0 = Unassign (No international
permit table applied.)
1 = Assign (Table in PRG
21-06-02 is applied.)
Maximum of 6 digits to be as-
signed
0 = No Table Applied
1 ~ 4 = Tables 1 ~ 4 ( Defined in
PRG 21-06-03)
Code Restriction/Toll Restriction
ISSUE 1.0
Default
1
2
1
1
Class No1, 6 ~ 15 : 0
Class No2 ~ 5 : 1
All Table = No Setting
Class No1, 3 ~ 15 : 0
Class No2 : 1
All Table = No Setting
Class No1 ~ 2, 6 ~ 15 :
0
Class No3 : 1
Class No4 : 2
Class No5 : 3