NEC SL2100 Features And Specifications Manual page 178

SL2100
Program
No.
40-10-07 * Voice Announcement Service Option - Set VRS
Message for Caller ID Refuse (VRS Msg CID)
15-07-01 Programmable Function Keys
11-10-34 Service Code Setup (for System Administrator) -
Set Caller ID Refuse
C
20-07-25 Class of Service Options (Administrator Level) -
Set/Cancel Caller ID Refuse
Caller ID Refuse for "Private" Numbers
Program
No.
14-01-27 * Basic Trunk Data Setup - Caller ID Refuse Setup
22-18-01 Private Call Assignment Setup - Transfer Mode
22-18-03 * Private Call Assignment Setup - Incoming Ring
Pattern
40-10-06 * Voice Announcement Service Option - Set VRS
Message for Private Call Refuse (VRS Msg Pri-
vate Call)
15-07-01 Programmable Function Keys
11-10-32 Service Code Setup (for System Administrator) -
Set Private Call Refuse
20-07-24 Class of Service Options (Administrator Level) -
Set/Cancel Private Call Refuse
The Caller ID - Flexible Ringing Flowchart below helps define programming:
1-164
Program Name
Program Name
Input Data
0 = No Message Played
1 ~ 100 = VRS Message 1 ~ 100
101 = VRS Fixed message (Mes-
sage will only play if PRG
40-10-01 is enabled.)
87 = Caller ID Refuse
0~9, , # Maximum of 8 digit
*
0 = Off (User cannot control the
feature.)
1 = On
Input Data
0 = Disable (CID refuse will not
function.)
1 = Enable
0 = Not Defined (Private call will
not transfer to a user in the sys-
tem, can be routed to VRS mes-
sage in PRG 40-10-06.)
1 = Internal Dial (Specified in
PRG 22-18-02)
2 = Incoming Ring Group (Speci-
fied in PRG 22-04)
Incoming Ring Pattern (0 ~ 13)
0 = Normal pattern
1 ~ 4 = Tone pattern (1 ~ 4)
5 ~ 9 = Scale pattern (1 ~ 5)
10 ~ 13 = Tone pattern (5 ~ 8)
0 = No Message Played
1 ~ 100 = VRS Message 1 ~ 100
101 = VRS Fixed message (Mes-
sage will only play if PRG
40-10-01 is enabled.)
86 = Private Call Refuse
0~9, , # Maximum of 8 digit
*
0 = Off (User cannot control the
feature.)
1 = On
Caller ID - Flexible Ringing
ISSUE 1.0
Default
0
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
748
COS1 ~ 14/COS15 = 1
Default
0
0
0
0
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
646
COS1 ~ 14/COS15 = 1