NEC SL2100 Features And Specifications Manual page 308

SL2100
Single Line Terminal
1. While talking to the Door Box, hookflash.
To answer a Door Box chime:
1. Lift the handset or press Speaker key.
To answer a Door Box call while busy on another call:
D
Multiline Terminal
If you are busy on a call, the display shows the incoming Door Box call and the large LED flashes.
1. Place your active call on hold by pressing Hold key.
2. When you hear dial tone, dial the door box access code (702 by default) plus the door box
number (1~6) to answer the Door Box call.
To retrieve the original call, hang up with the door box and press the flashing line key of the original
call, or press the flashing Hold key, or programmed Intercom Key if original caller was an internal
user.
To retrieve the original call, hang up with the door box and press the DND/CONF key or Conf softkey
(2W Digital/IP Multiline Terminal).
Single Line Terminal
If you are busy on a call, an off-hook signal is heard indicating the incoming Door Box call.
1. Press Flash key or hookflash to place your active call on hold.
2. Dial the door box access code (702 by default) plus the door box number (1~6) to answer the
Door Box call.
To retrieve the original call, hang up. The original call rings the Single Line Terminal.
To activate Call Forwarding Off-Premise for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1. At the Multiline Terminal, press Speaker key + dial SC 722.
- OR -
At the Multiline Terminal only, press the External Forward by Doorphone key (PRG 15-07-01 or
SC 751, code 54).
- OR -
At the Single Line Terminal, lift the handset + dial 722.
2. Dial the Door Box number (1~6).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker key (or hang up at the Single Line Terminal) to hang up.
1-294
ISSUE 1.0
Door Box