NEC SL2100 Features And Specifications Manual page 228

SL2100
Operation
To joining a Remote Conference Call:
1. Internal Extension:
Lift the handset and dial the extension number of the Remote Conference pilot number (assigned
in PRG 11-19-01).
- OR -
External Party:
Dial the telephone number for the Remote Conference pilot number (assigned in PRG 11-19- 01).
• When using a subaddress, dial the Remote Conference pilot number as the Subaddress
2. The password is requested by the VRS (Please enter your security code.).
3. Dial the password of the conference group.
C
4. If the password matches, the participant becomes part of the Remote Conference.
If the password does not match, a warning tone is heard.
• A busy tone will also be heard if the maximum number of Remote Conference participants has
been reached or if a conference resource cannot be secured.
• As the maximum time for the conference nears, the system will provide an end tone to the
participants according to the timer in PRG 20-34-05. Once this timer expires, if the conference
is still ongoing, the call will be disconnected by the system.
Transferring a Call into a Remote Conference Call:
1. With an active call, press the Transfer key.
2. Dial the Conference Pilot number (Program 11-19-01) then hang up. The caller is prompted to
enter the conference password.
PRG 20-11-11 must be enabled for Automatic On Hook Transfer.
- OR -
1. With an active call, press the Hold key. (Both Normal Hold and Exclusive Hold are supported as
per PRG 15-02-06)
- OR -
With an active call, press the Hold key and Dial Group Hold service code (732) as defined in PRG
11-12-33)
2. Dial the Conference Pilot number, then press the Transfer Key. The caller is prompted to enter
the conference password.
• Warning Tone is heard if VRS channels are full.
Automated Attendant Transfer the Call into a Remote Conference Call:
1. Automated Attendant answer the trunk call.
2. Dial the Remote Conference Pilot number.
• Dial action table can also be used to transfer the call,Only unscreened transfer is supported.
• If VRS channels are full, User will connect to Remote Conference and Remote Conference
Prompts repeats again.
• If Remote Conference members are full, User will connect to Remote Conference and Remote
Conference Prompts repeats again.
If PRG 20-11-31 is Disabled, User will connect to Remote Conference and Remote Conference
Prompts repeats again.
3. The caller is prompted to enter the password.
1-214
ISSUE 1.0
Conference, Remote