NEC SL2100 Features And Specifications Manual page 874

SL2100
Program
No.
16-02-01 Department Group Assignment for Extensions
16-03-01 Secondary Department Group
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
20-11-17 Class of Service Options (Hold/Transfer Service)
- Department Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
U
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
20-13-14 Class of Service Options (Supplementary Serv-
ice) - Department Calling (PLT No Called Exten-
sion)
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
22-07-01 DIL Assignment - Number of Transferring Desti-
nation
24-02-05 System Options for Transfer - Message Wait
Ring Interval Time
24-02-08 System Options for Transfer - Delayed Transfer
Time for all Department Groups
24-05-01 Department Group Transfer Target Setup - Speed
Dial Area Number
Operation
To call a UCD Group:
1. At the Multiline Terminal, press Speaker key.
- OR -
At Single Line Terminal, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
The system routes the call to the first free telephone in the (UCD group) department.
To log out of your UCD (Depatment Calling) Group:
While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press Speaker key.
1-860
Program Name Input Data
-
-
1 ~ 15
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
0 = Off
1 = On
0 = Off (manually)
1 = On (automatically)
0 = Off
1 = On
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
Maximum of 8 digits (0 ~ 9, , #)
*
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 999
Uniform Call Distribution (UCD)
ISSUE 1.0
Default
Refer to Programming
Manual.
No Setting
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
0
No Setting
30
10
999