NEC SL2100 Features And Specifications Manual page 217

ISSUE 1.0
Guide to Feature Programming
Program Program Name
No.
11-10-17 Service Code Setup (for System Administrator) -
Dial Block by Supervisor
11-11-33 Service Code Setup (for Setup/Entry Operation) -
Dial Block
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-08 Class of Service Options (Outgoing Call Service)
- Toll Restriction Dial Block
21-07-01 Toll Restriction Override Password Setup - Pass-
word
21-09-01 Dial Block Setup - Toll Restriction Class With Di-
al Block
21-09-02 Dial Block Setup - Supervisor Password
21-10-01 Dial Block Restriction Class Per Extension - Toll
Restriction Class
90-19-01 Dial Block Release - Delete IP Telephone
Operation
To set Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
To release Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600.
3. Dial the 4-digit Dial Block code.
4. Dial 0.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
Features and Specifications Manual
Input Data
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
1 ~ 15
0 = Off
1 = On
Four Digits (Fixed)
1 ~ 15
0 ~ 9, , #
*
(4-digit fixed)
0, 1 ~ 15
(0 = No Setting)
[Release ?] : Dial 1 + press Hold
(Press Hold only to cancel.)
SL2100
Default
601
600
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
No Setting
15
No Setting
0
-
1-203
C