NEC SL2100 Features And Specifications Manual page 835

ISSUE 1.0
Program Program Name
No.
13-04-03 Speed Dialing Number and Name - Transfer
Mode
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
13-04-05 Speed Dialing Number and Name - Incoming
Ring Pattern
14-01-04 Basic Trunk Data Setup - Transmit Gain Level for
Conference and Transfer Calls
14-01-05 Basic Trunk Data Setup - Receive Gain Level for
Conference and Transfer Calls
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-07-05 Class of Service Options (Administrator Level) -
Set/Cancel Automatic Trunk-to-Trunk Transfer
20-07-11 Class of Service Options (Administrator Level) -
Forced Trunk Disconnect (analog trunk only)
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
24-02-10 System Options for Transfer - Disconnect Trunk-
to-Trunk
24-04-01 Automatic Trunk-to-Trunk Transfer Target Setup
- Speed Dial Area Number
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
Features and Specifications Manual
Input Data
0 = Not Used (Calls will not be
routed based off a users caller
ID.)
1 = Internal Dial (Calls will be
routed to an internal number
specified in PRG 13-04-04.)
2 = Incoming Ring Group (Calls
will be routed to a ring group
specified in PRG 13-04-04.)
3 = Remote Monitor (Used for
the security feature and not Flex-
ible Caller ID routing.)
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0, , #, P, R, @
*
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 8 digits)
0 = Normal System Ring Pattern
1 ~ 4 = Tone Pattern 1 ~ 4
5 ~ 9 = Scale Pattern 1 ~ 5
10 ~ 13 = Tone Pattern 5 ~ 8
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
0 = Disable (No)
1 = Enable (Yes)
1 ~ 15
0 = Off
1 = On
0 = Off
1 = On
0 ~ 64800 seconds
0 ~ 64800 seconds
Trunk Port Number : 1 - 128
0 ~ 999
0 ~ 64800 seconds
0 ~ 64800 seconds
SL2100
Default
0
No Setting
0
32 (0 dB)
32 (0 dB)
1
Extension 101 is Class
15 and other Extension
are Class 1
COS1 ~ 14/COS15 = 0
COS1 ~ 14/COS15 = 1
1800
0
999
1800
30
1-821
T