Temperature Settings For The Preheater And Print Heater; Temperature Setting For The Dryer - Roland SJ-1045EX User Manual

Temperature Settings for the Preheater and Print Heater

Procedure
PRE
PRINT
W 2600 mm
At first, the preheater and preheater do not warm up to the preset temperature. (This is the factory-default set-
ting.) Pressing

Temperature Setting for the Dryer

Actual temp. (˚C)
Preset temp. (˚C)
Press the keys to set
the temperature.
Downloaded From ManualsPrinter.com Manuals
Press
45 45
45 45
Use
Use
Preset Actual
Press
temp. temp.
Press
Press
SETUP SHEET
to make the light come on makes them to warm up to the preset temperature.
Turn on the main power switch for the dryer.
This switch lights up when it is on.
2-3 Settings of Preheater, Print Heater and Dryer
.
to select the preheater or print heater.
to make the setting.
to enable the setting.
.
to go back to the original screen.
Chapter 2 Operation 41