Settings For The Media Heating System; What Is The Media Heating System; Making The Temperature Setting For The Media Heating System - Roland SOLJET PROIII XC-540 User Manual

2-3 Settings for the Media Heating System

What Is the Media Heating System?

This machine is equipped with a media heating system that warms the media. You use this mainly to
improve ink adhesion and dry the ink. You can adjust the temperature settings to match the type of
media and the printing speed.
Preheater
This device warms the media
before printing.
Print heater
This device is used mainly to
improve ink adhesion.
Dryer
You use this to warm the media
after printing and speed up ink-
drying.
WARNING
WARNING
WARNING
WARNING

Making the Temperature Setting for the Media Heating System

Procedure

PRE
DRY

DRYER
38
Chapter 2 Basic Operation
Caution: high temperatures
The platen and dryer become hot. Exercise caution to avoid fire or
burns.
Remove any loaded media or switch off the sub power when print-
ing is not being performed.
The continued application of heat at a single location may cause fire or
produce toxic gases.
Never use media that cannot withstand the heat.
Doing so may result in fire or the release of toxic gases, or may degrade
the media.
Never use the platen or dryer for any purpose for which they are
not intended, such as to dry clothing.
Doing so may cause overheating, resulting in fire or accident.
35 PRINT 35
50
50
50 50
Press .
The present temperature is displayed.
Press a second time.
Use to select the unit.