Change Your Password; Save Your Configuration - ZyXEL Communications GS1350 Series User Manual

Table 19 Navigation Panel Links (Surveillance Mode) (continued)
LINK
Maintenance
Backup
Configuration
Firmware
Upgrade
Reboot System
Restore
Configuration
Save
Configuration
Tech-Support

4.5.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.
Click Management > Access Control > Logins to display the next screen.
Figure 48 Change Administrator Login Password

4.6 Save Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to the
run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off.
Click the Save link in the upper right hand corner of the Web Configurator to save your configuration to
non-volatile memory. Non-volatile memory refers to the Switch's storage that remains even if the
Switch's power is turned off.
Chapter 4 Web Configurator
DESCRIPTION
This link takes you to a screen where you can save your Switch's configurations (settings) for
later use.
This link takes you to a screen to upload firmware to your Switch.
This link takes you to a screen to reboot the Switch without turning the power off.
This link takes you to a screen where you can upload a stored device configuration file.
This link takes you to a screen where you can save the current configuration (settings) to a
specific configuration file on the Switch.
This link takes you to a screen where you can download related log reports for issue analysis.
Log reports include CPU history and utilization, crash and memory.
GS1350 Series User's Guide
66