Table 8 Wizard > Basic > Step 2 Password (continued)
LABEL
DESCRIPTION
Get Community
Enter the Get Community string, which is the password for the incoming Get- and
GetNextrequests from the management station.
The Get Community string is only used by SNMP managers using SNMP version 2c or lower.
Set Community
Enter the Set Community string, which is the password for the incoming Set- requests from
the management station.
The Set Community string is only used by SNMP managers using SNMP version 2c or lower.
Trap Community
Enter the Trap Community string, which is the password sent with each trap to the SNMP
manager.
The Trap Community string is only used by SNMP managers using SNMP version 2c or lower.
Previous
Click Previous to show the previous screen.
Next
Click Next to show the next screen.
Cancel
Click Cancel to exit this screen without saving.
After clicking Next, the Link Aggregation screen appears.
Figure 40 Wizard > Basic > Step 3 Link Aggregation
Each field is described in the following table.
Table 9 Wizard > Basic > Step 3 Link Aggregation
LABEL
DESCRIPTION
Link Aggregation
T1-Tx
Click the arrows to add or delete icons located on the left to desired preference.
Select Static if the ports are configured as static members of a trunk group.
Select LACP if the ports are configured to join a trunk group via LACP.
Chapter 4 Web Configurator
GS1350 Series User's Guide
54