ZyXEL Communications GS1350 Series User Manual page 180

Figure 134 Advanced Application > AAA > AAA Setup
The following table describes the labels in this screen.
Table 79 Advanced Application > AAA > AAA Setup
LABEL DESCRIPTION
Authentication Use this section to specify the methods used to authenticate users accessing the Switch.
Privilege Enable These fields specify which database the Switch should use (first, second and third) to
authenticate access privilege level for administrator accounts (users for Switch management).
Configure the access privilege of accounts via commands (See the CLI Reference Guide) for
local authentication. The RADIUS is an external server. Before you specify the priority, make sure
you have set up the corresponding database correctly first.
You can specify up to two methods for the Switch to authenticate the access privilege level of
administrators. The Switch checks the methods in the order you configure them (first Method 1,
and then Method 2). You must configure the settings in the Method 1 field. If you want the
Switch to check another source for access privilege level specify it in the Method 2 field.
Select local to have the Switch check the access privilege configured for local authentication.
Select radius to have the Switch check the access privilege via the external server.
Chapter 22 AAA
GS1350 Series User's Guide
180