ZyXEL Communications GS1350 Series User Manual page 234

Click Apply to save your changes back to the run-time memory.
5
Click the Save link in the upper right corner of the Web Configurator to save your configuration
6
permanently.
Note: In the event of a PD performing firmware upgrade, the PD may stop responding to ping
or fail to provide LLDP packets for an extended period of time. When the Switch resets
power to the PD before firmware upgrade is finished, it may permanently damage the
PD or require a hard reset to recover it. It is strongly advised to disable the Switch's Auto
PD Recovery function before upgrading the PD's firmware. This will prevent damage
caused by a power cutoff.
Chapter 28 Auto PD Recovery
GS1350 Series User's Guide
234