ZyXEL Communications GS1350 Series User Manual page 62

K Click this link to go to the Neighbor screen where you can see and manage neighbor devices
–
learned by the Switch.
In the navigation panel, click a main link to reveal a list of sub-menu links.
Table 16 Navigation Panel Sub-links Overview (Standard Mode)
BASIC SETTING
The following table describes the links in the navigation panel.
Table 17 Navigation Panel Links (Standard Mode)
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system information.
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch parameters such as VLAN
type and priority queues.
IP Setup This link takes you to a screen where you can configure the IP address and subnet mask
(necessary for Switch management) and set up to 64 IP routing domains.
Port Setup This link takes you to a screen where you can configure settings for individual Switch ports.
PoE Setup For PoE models.
This link takes you to a screen where you can set priorities, PoE power-up settings and schedule
so that the Switch is able to reserve and allocate power to certain PDs.
Interface Setup This link takes you to a screen where you can configure settings for individual interface type
and ID.
IPv6 This link takes you to a screen where you can view IPv6 status and configure IPv6 settings.
Chapter 4 Web Configurator
ADVANCED APPLICATION
GS1350 Series User's Guide
62
IP APPLICATION MANAGEMENT