Ipv6 Global Address Setup - ZyXEL Communications GS1350 Series User Manual

Table 42 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Link-Local Address Setup (continued)
LABEL
Apply
Cancel
Clear
Index
Interface
IPv6 Link-Local
Address
IPv6 Default
Gateway

8.10.7 IPv6 Global Address Setup

Use this screen to configure the interface's IPv6 global address. Click the link next to IPv6 Global Address
Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 89 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
The following table describes the labels in this screen.
Table 43 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
LABEL
Domain Name
Server 1/2
Apply
Cancel
Interface
Chapter 8 Basic Setting
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This is the static IPv6 link-local address for the interface.
This is the default gateway IPv6 address for the interface.
DESCRIPTION
Enter a domain name server IPv6 address in order to be able to use a domain name instead of an
IP address.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click this to reset the Domain Name Server values in this screen to their last-saved values.
Select the IPv6 interface you want to configure.
GS1350 Series User's Guide
114