Static Vlan - ZyXEL Communications GS1350 Series User Manual

49.9 Static VLAN

Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
Use this screen to view static VLAN status for the Switch. Click Switching > VLAN > Static VLAN to display
the screen as shown next.
Figure 264 Switching > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 179 Switching > VLAN > Static VLAN
LABEL
VID
Active
Name
Add
Edit
Delete
Click Add or Edit button to open the following screen. Use this screen to configure a static VLAN for the
Switch.
Chapter 49 Switching
DESCRIPTION
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings.
This field indicates whether the VLAN settings are enabled (ON) or disabled (OFF).
This field displays the descriptive name for this VLAN group.
Click this button to create a new static VLAN.
Click this button to configure the static VLAN.
Click this button to remove the static VLAN.
GS1350 Series User's Guide
356