Change Your Password - ZyXEL Communications 43222612 User Manual

Table 20 Navigation Panel Links (Networked AV Mode) (continued)
LINK
SWITCHING
Broadcast Storm
Control
Link Aggregation
VLAN
Multicast
NETWORKING
IP Setup
SECURITY
Access Control
Logins
Remote
Management
SNMP
Service
Access
Control
Maintenance
Backup
Configuration
Firmware
Upgrade
Reboot
System
Restore
Configuration
Save
Configuration
Tech-Support
Port Mirror

4.5.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.
Click Management > Access Control > Logins to display the next screen.
Chapter 4 Web Configurator
DESCRIPTION
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
This link takes you to screens where you can view and search all static VLAN groups, view
detailed port settings and status of the static VLAN group, configure a static VLAN for the
Switch, and configure the static VLAN (IEEE 802.1Q) settings on a port.
This link takes you to screens where you can view multicast group information, configure various
multicast features like IGMP snooping and filtering profile, and create multicast VLANs.
This screen allows you to configure the IP address and subnet mask (necessary for Switch
management) and set up to 64 IP routing domains.
This link takes you to a screen where you can change the system login password, as well as
configure up to four login details.
This link takes you to a screen where you can specify a group of one or more "trusted
computers" from which an administrator may use a service to manage the Switch.
This link takes you to screens where you can specify the SNMP version and community
(password) values, configure where to send SNMP traps from the Switch, enable loopguard/
errdisable/poe/linkup/linkdown/lldp/transceiver-ddm/storm-control on the Switch, specify the
types of SNMP traps that should be sent to each SNMP manager, and add/edit user
information.
This link takes you to a screen where you can decide what services you may use to access the
Switch.
This link takes you to a screen where you can save your Switch's configurations (settings) for
later use.
This link takes you to a screen to upload firmware to your Switch.
This link takes you to a screen to reboot the Switch without turning the power off.
This link takes you to a screen where you can upload a stored device configuration file.
This link takes you to a screen where you can save the current configuration (settings) to a
specific configuration file on the Switch.
This link takes you to a screen where you can download related log reports for issue analysis.
Log reports include CPU history and utilization, crash and memory.
This link takes you to screens where you can copy traffic from one port or ports to another port
in order that you can examine the traffic from the first port without interference.
GS2220 Series User's Guide
75