ZyXEL Communications GS1350 Series User Manual page 375

Table 193 Security > Access Control > Service Access Control (continued)
LABEL DESCRIPTION
Login Timeout The Telnet or SSH server do not allow multiple user logins at the same time. Enter how many
seconds (from 30 to 300 seconds) a login session times out. After it times out you have to start
the login session again. Very long login session timeouts may have security risks.
For example, if User A attempts to connect to the Switch (via SSH), but during the login stage,
do not enter the user name and/or password, User B cannot connect to the Switch (via SSH)
before the Login Timeout for User A expires (default 150 seconds).
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 51 Security
GS1350 Series User's Guide
375