Table of Contents
Advertisement
Table 5 Navigation Panel Links (continued)
LINK
DiffServ
DHCP
VRRP
Load Sharing
ARP Setup
Management
Maintenance
Access Control
Diagnostic
System Log
Syslog Setup
Cluster
Management
MAC Table
IP Table
ARP Table
Routing Table
Path MTU Table
Configure Clone
IPv6 Neighbor
Table
Port Status
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to screens where you can enable DiffServ, configure marking rules and
set DSCP-to-IEEE802.1p mappings.
This link takes you to screens where you can configure the DHCP settings.
This link takes you to screens where you can configure redundant virtual router for your
network.
This link takes you to a screen where you can enable Equal-Cost MultiPath (ECMP) routing
and set the criteria the Switch uses to determine the routing path for a packet.
This link takes you to a screen where you can configure ARP learning mode on a per-port
basis and create static ARP entries which do not age out.
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password and
configure SNMP and remote management.
This link takes you to screens where you can ping IP addresses, run traceroute, test
port(s).
This link takes you to a screen where you can view system logs.
This link takes you to a screen where you can setup system logs and a system log server.
This link takes you to a screen where you can configure clustering management and view
its status.
This link takes you to a screen where you can view the MAC address and VLAN ID of a
device attach to a port. You can also view what kind of MAC address it is.
This link takes you to a screen where you can view the IP addresses and VLAN ID of a
device attached to a port.You can also view what kind of device it is.
This link takes you to a screen where you can view the MAC address – IP address
resolution table.
This link takes you to a screen where you can view the routing table.
This link takes you to a screen where you can view the IPv6 path MTU table.
This link takes you to a screen where you can copy attributes of one port to (an)other
port(s).
This link takes you to a screen where you can view the Switch's IPv6 neighbor table.
This link takes you to a screen where you can view the port statistics.
GS3700/XGS3700 Series User's Guide
42
Advertisement
Table of Contents
