Configure Dhcpv4 Relay - ZyXEL Communications GS1350 Series User Manual

Figure 63 Tutorial: Add Tag for Frames Received on Port 2
11 Click the Save link in the upper right corner of the Web Configurator to save your configuration
permanently.

6.3.3 Configure DHCPv4 Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
Click IP Application > DHCP > DHCPv4 and then the Global link to open the DHCP Relay screen.
1
Select the Active check box.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Remote DHCP Server 1 field.
3
Select default1 or default2 in the Option 82 Profile field.
4
Click Apply to save your changes back to the run-time memory.
5
Figure 64 Tutorial: Set DHCP Server and Relay Information
Click the Save link in the upper right corner of the Web Configurator to save your configuration
6
permanently.
The DHCP server can then assign a specific IP address based on the DHCP request.
7
Chapter 6 Tutorials
GS1350 Series User's Guide
80