ZyXEL Communications GS1350 Series User Manual page 332

The Cloud Management screen displays links to Nebula Switch Registration which has a QR code
containing the Switch's serial number and MAC address for handy registration of the Switch at NCC.
Click System > Cloud Management in the navigation panel to display this screen.
Figure 244 System > Cloud Management
Select On to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
registered in the NCC, it will go into cloud management mode.
In cloud management mode, then NCC will first check if the firmware on the Switch needs to be
upgraded. If it does, the Switch will upgrade the firmware immediately. If the firmware does not need to
be upgraded, but there is newer firmware available for the Switch, then it will be upgraded according
to the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading
firmware:
Download firmware via the NCC.
1
Upgrade the firmware and reboot.
2
Note: While the Switch is rebooting, do NOT turn off the power.
Disable On to turn off NCC discovery on the Switch. The Switch will NOT discover the NCC and remain in
standalone mode.
This screen has a QR code containing the Switch's serial number and MAC address for handy NCC
registration of the Switch using the Nebula Mobile app. First, download the app from the Google Play
store for Android devices or the App Store for iOS devices and create an organization and site.
Chapter 47 System
GS1350 Series User's Guide
332