ZyXEL Communications GS1350 Series User Manual page 75

Go to Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup, and create a VLAN with
2
ID of 100. Add ports 4, 5 and 6 in the VLAN by selecting Fixed in the Control field as shown.
De-select Tx Tagging because you do not want outgoing traffic to contain this VLAN tag.
Click Add.
Figure 54 Tutorial: Create a VLAN and Add Ports to It
Go to Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup, and set the PVID of the
3
ports 4, 5 and 6 to 100. This tags untagged incoming frames on ports 4, 5 and 6 with the tag 100.
Figure 55 Tutorial: Tag Untagged Frames
Go to Advanced Application > DHCP Snooping > Configure, activate and specify VLAN 100 as the
4
DHCP VLAN as shown. Click Apply.
Chapter 6 Tutorials
GS1350 Series User's Guide
75