Remote Management - ZyXEL Communications GS1350 Series User Manual

Table 137 Management > Access Control > Service Access Control (continued)
LABEL
Timeout
Login Timeout
Apply
Cancel

34.6 Remote Management

Use this screen to specify a group of one or more "trusted computers" from which an administrator may
use a service to manage the Switch.
Click Management > Access Control > Remote Management to view the screen as shown next.
You can specify a group of one or more "trusted computers" from which an administrator may use a
service to manage the Switch. Click Access Control to return to the Access Control screen.
Chapter 34 Access Control
DESCRIPTION
Enter how many minutes (from 1 to 255) a management session can be left idle before the
session times out. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks.
The Telnet or SSH server do not allow multiple user logins at the same time. Enter how many
seconds (from 30 to 300 seconds) a login session times out. After it times out you have to start
the login session again. Very long login session timeouts may have security risks.
For example, if User A attempts to connect to the Switch (via SSH), but during the login stage,
do not enter the user name and/or password, User B cannot connect to the Switch (via SSH)
before the Login Timeout for User A expires (default 150 seconds).
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS1350 Series User's Guide
277