Restore Configuration; Save Configuration - ZyXEL Communications GS1350 Series User Manual

Click OK again and then wait for the Switch to restart. This takes up to 2 minutes. This does not affect the
2
Switch's configuration.
Click Current Configuration and follow steps 1 to 2 to reboot and load the current configuration on the
Switch.
Click Factory Default and follow steps 1 to 2 to reboot and load Zyxel factory default configuration
settings on the Switch.
Click Custom Default and follow steps 1 to 2 to reboot and load a customized default file on the Switch.

52.5 Restore Configuration

You can restore a previously saved device configuration from your computer.
Click Maintenance > Maintenance > Restore Configuration to display the screen as shown next. Use this
screen to restore a previously saved configuration from your computer.
Figure 284 Maintenance > Maintenance > Restore Configuration
Follow the steps below to restore a previously saved configuration from your computer in this screen.
Click Choose File or Browse to locate the configuration file you wish to restore to the Switch.
1
Click Restore. The restore progress is shown.
2
Figure 285 Restoring Configuration (Progress Bar)

52.6 Save Configuration

Click Maintenance > Maintenance > Save Configuration to view the screen as shown next.
Chapter 52 Maintenance
GS1350 Series User's Guide
379