Example: Dhcp Relay For Two Vlans - ZyXEL Communications GS1350 Series User Manual

Table 121 IP Application > DHCP > DHCPv4 > VLAN > Port (continued)
LABEL
Profile Name
Delete
Cancel

31.4.8 Example: DHCP Relay for Two VLANs

The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two DHCP servers are
installed to serve each VLAN. The system is set up to forward DHCP requests from the dormitory rooms
(VLAN 1) to the DHCP server with an IP address of 192.168.1.100. Requests from the academic buildings
(VLAN 2) are sent to the other DHCP server with an IP address of 172.16.10.100.
Figure 185 DHCP Relay for Two VLANs
For the example network, configure the VLAN Setting screen as shown.
Chapter 31 DHCP
DESCRIPTION
This field displays the DHCP option 82 profile that the Switch applies to the ports in this VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Select the entries that you want to remove, then click the Delete button to remove the selected
entries from the table.
Click this to clear the check boxes above.
GS1350 Series User's Guide
250