Configure A Static Vlan - ZyXEL Communications GS1350 Series User Manual

9.4 Configure a Static VLAN

Use this screen to configure a static VLAN for the Switch. Click the Static VLAN Setup link in the VLAN
Configuration screen to display the screen as shown next.
Figure 101 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
The following table describes the related labels in this screen.
Table 50 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
LABEL
ACTIVE
Name
VLAN Group ID
Port
*
Chapter 9 VLAN
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable characters. Spaces are allowed.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Note: Do NOT add a VLAN ID that has been used in the Voice VLAN Setup.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
GS1350 Series User's Guide
126