Neighbor Detail Screen - ZyXEL Communications GS1350 Series User Manual

Table 162 Summary (continued)
LABEL
Extended
Range
Device Type
System Name
IP
Discovered
Devices
Action

45.2.1 Neighbor Detail Screen

The Neighbor Detail screen allows you to view and manage the Switch's neighboring devices more
conveniently. It uses Layer Link Discovery Protocol (LLDP) to discover all neighbor devices connected to
the Switch including non-Zyxel devices. You can perform tasks on the neighboring devices like login,
reboot (turn the power off and then back on again), and reset to factory default settings in the
Neighbor Detail screen. For more information on LLDP, see
This screen shows the neighboring device first recognized on an Ethernet port of the Switch. Device
information is displayed in gray when the neighboring device is offline.
Up to 10 neighboring device records per Ethernet port can be retained in this screen even when the
devices are offline. When the maximum number of neighboring device records per Ethernet port is
reached, new device records automatically overwrite existing offline device records, starting with the
oldest existing offline device record first.
Click Summary > Neighbor Detail to see the following screen.
Figure 240
Chapter 45 Surveillance Mode
DESCRIPTION
This field shows whether PoE range is extended up to 250 meters for the port on this Switch.
This field displays the model name of this Switch.
This field displays the name used to identify the Switch on any network.
This field displays the Switch's current IPv4 address.
This field displays the Neighbor Detail of the discovered device by clicking the link.
Click the Reboot button to restart the neighbor device. A warning message "Are you sure you
want to reboot the powered device?" appears prompting you to confirm the action. After
confirming the action a count down button (from 5 to 0) starts.
Click the Default button to reset the neighbor device to its factory default settings. A warning
message "Are you sure you want to reset the AP to factory default?" appears prompting you to
confirm the action.
Summary > Neighbor Detail
GS1350 Series User's Guide
(Section 27.1 on page
324
208).