Nortel Meridian 1 Manual page 70

Page 66 of 144 Add-on modules
553-3001-215 Standard 12.00 January 2002
Figure 20
Attendant console knockout section
Base
16 Reinsert the 12 screws that secure the top cover to the console base
and tighten.
17 Insert the two new screws supplied with the BLF/CGM that attach it to
the base, and tighten. See Figure 24 on page 70.
18 Cable in BLF power at the local Main Distribution Frame (MDF) as per
M2250 cross-connections. See Procedure 1 on page 18.
19 If required, replace the adjustable stand.
20 Reconnect the main system cable to the rear of the console.
21 If the BLF/CGM has been correctly installed, the main menu appears
when power is supplied to the attendant console. Test the BLF/CGM
by selecting a menu option. Refer to Busy Lamp Field/Console
Graphics Module User Guide for programming information.
22 Define the Busy Lamp Field in the system database. Refer to Features
and Services (553-3001-306).
23 Test the Busy Lamp Field features using M1250/M2250 Attendant
Console User Guide.
Knockout Section
(Clean Away 6 Tags)
553-1893