Nortel Meridian 1 Manual page 107

Figure 35
Ribbon cable placement
1
Reattaching the Base
13 Make sure that all ribbon cables are lying flat and not caught on any
posts on the telephone cover or base.
CAUTION
For the M2616 and M2008HF, make sure that the
microphone has not been moved from its black
rubber holder. The holder should be seated in the
main board near the ribbon cable that was just
attached.
Add-on modules
Cable routed
underneath
Power Module
2
Telephone and Attendant Console Installation
Page 103 of 144
M2008HF/M2616
Microphone
553-6329