Nortel Meridian 1 Manual page 46

Page 42 of 144 Telephones
Figure 13
Installing the M2616CT battery
Optional headset attaches
to handset for
handsfree activity
WARNING: Do NOT plug stereo/audio
headset into the M2616CT jack. This
could cause damage to the headset.
Main battery
1. Clip Main battery into back of handset.
2. Place bottom of battery in position.
3. Snap top of battery into place
553-3001-215 Standard 12.00 January 2002
Procedure 1
M2616CT Wall mounting
The M2616CT base is equipped with a reversible footstand that allows you to
mount the telephone on the wall. The procedure is described as follows:
1 Remove the handset and place the telephone upside down on a level
work surface covered with soft material to prevent damage to movable
keys and the telephone face.
2 Disconnect all cords from the set.
3 Remove the two screws from the footstand assembly.
Spare battery (optional) slides into base
Contact points MUST meet
Handset rests in cradle above battery
Spare
battery
Contact
points
Spare battery indicator light
is yellow when battery
is charging in spare port
Main battery indicator
is red when battery is
charging and green
when battery is charged
553-8570