Nortel Meridian 1 Manual page 38

Page 34 of 144 Telephones
553-3001-215 Standard 12.00 January 2002
Procedure 2
Installing the M2317 telephone
1 Complete the wiring and cross-connection according to Figure 12
before connecting the telephone to the TELADAPT connector block.
2 Place the telephone upside down on a number of sheets of soft, clean
paper and on a solid, level work surface to prevent damage to movable
keys and the telephone's face.
3 Connect the handset cord 4-conductor TELADAPT connectors to the
handset and to the telephone and snap into place.
4 Turn the smooth side of the cord away from the telephone base and
secure it under the restraining tab. This ensures that the telephone sits
level after the installation is complete.
5 Connect the 6-conductor line cord to the telephone base, and place it
under the restraining tabs.
6 Turn the telephone face up, and place it in the normal operating
position.
7 Print the directory number (DN) on the designation card and place it in
the designation card holder.
8 Designate button labels for programmable keys, and place them under
the button cover.
9 Insert the line cord TELADAPT connector block and snap it into place.
Place the line cord under the restraining tabs.
10 Plug the 5 V power supply connector into the back of the telephone.
11 Plug the power supply into an AC utility outlet.
12 After the M2317 digital telephone is connected to a line that is both
enabled and designated as an M2317 digital line, the startup screen
displays INITIALIZATION V6.4. Within 5 seconds, the Idle state screen
is displayed, and the M2317 is operational. The term V6.4 represents
the firmware issue number, and may differ with some installations.
13 If the M2317 has been connected to a line that is designated as a
digital line, but is not enabled, the display will prompt CONTACT
SYSTEM ADMINISTRATOR. The line must be enabled using LD 32
from the maintenance terminal, and by enabling the features outlined
in the work order. Refer to the Software Input/Output Guide
Administration (553-3001-311) for the required routines, prompts, and
responses.