Bowflex LateralX LX5 Service Manual page 9

Condition/Problem
Fan will not turn on, but Console
operates
Unit rocks/does not sit level
Machine slides from side to side
during operation
to operate
Click, tick or knocking sound
Workout results will not sync
with Bluetooth enabled device
®
Things to Check
Check for blockage of fan
Check leveler adjustment
Check surface under unit
Floor surface
Hardware
Check for loose hardware
Check foot assemblies, leg as-
semblies, handlebar assemblies
Current console mode
Total time of workout
Fitness machine
Bluetooth enabled device
™
Fitness App
Unplug unit from electrical outlet for 5 minutes. Remove material from fan. If
necessary, detach the Console to help with removal. Replace the Console if
unable to remove blockage.
Adjust levelers until machine is level.
Move machine to level area.
The machine may slide on a hard surface. Put the machine on a rubber
machine mat, which will provide a non-slip surface.
Tightly secure all hardware on the Pedal Arms and Handlebar Arms.
Tightly secure all hardware.
Manually move foot, leg, and handlebar assemblies to isolate sound. Contact
Customer Service (if inside US/Canada) or your local distributor (if outside
US/Canada).
Machine must be in Idle Mode to sync. Push the STOP/PAUSE button until
the Power-Up Mode screen is displayed.
A workout must be longer than 1 minute to be saved and posted by the
Console.
Unplug unit from electrical outlet for 5 minutes. Reconnect to outlet.
Consult your device to be sure that the Bluetooth
enabled on it.
Contact appsupport nautilus.com (if inside US/Canada) or your local
@
distributor (if outside US/Canada) for further assistance.
9
Solution
wireless feature has been
®